Why does the electric pizza machine suddenly lose power during use?

There are many possible reasons why an electric pizza machine suddenly loses power during use. Here are some common reasons:

Power supply problem:

Loose power socket: If the power socket has poor contact, the power supply may be interrupted.

Damaged power cord: If the power cord is damaged or aged, it may cause unstable current or disconnection.

Blown power fuse: The power supply of the electric pizza machine may be equipped with a fuse. If the machine is overloaded or short-circuited, the fuse will blow to protect the device, causing power outage.

Overload protection: The electric pizza machine may be overloaded during long-term high-load operation or use. The machine may be equipped with an overload protection device. Once the safe load is exceeded, the power will be automatically cut off to prevent damage.

Temperature control problem: If the heating element or thermostat of the machine fails, causing the device temperature to be too high, the overheating protection device may be triggered, and the power will be automatically cut off to prevent device damage or fire.

Internal circuit failure: Damage to the circuit board, connecting wires or components inside the machine may also cause power supply interruption and power outage.

Unstable voltage: Unstable grid voltage, especially when the voltage is too high or too low, may affect the normal operation of the device and even cause power outages. Some devices have voltage protection functions, which automatically power off when abnormal voltage occurs.

Faulty switches or control panels: Damaged switches, buttons or relays on the control panel may cause the electric pizza machine to fail to power on normally or suddenly power off during use.

External environmental problems: If the device is placed in a humid, extremely hot or poorly ventilated environment, it may cause internal circuit failures and power outages.

Solution:

Check the power socket, plug and power cord to ensure that they are not loose or damaged.

Confirm that the voltage is stable and meets the requirements of the machine.

Check the overload protection switch of the device to see if it needs to be reset.

If the machine has temperature control problems, check whether the thermostat or heating element is working properly.

If the above inspections cannot solve the problem, it is recommended to contact a professional maintenance personnel to check and repair the circuit or internal components.

When performing any inspections and repairs, always ensure that the electric pizza machine is disconnected from the power supply to avoid electric shock or further damage to the device.